滾筒型飛剪 Roller flying shear

滾筒型的飛剪，用于生產線分卷、剪切焊接區域和剪切取樣。在操作運行時滾筒剪由數字直接伺服控制，當機組速度變化后，將薄板長度的差異減到最小。滾筒剪的剪切速度最高能達到240mpm。已成功將該產品應用在國內各民企電鍍錫機組、連續退火機組及連軋機組中，并取得了良好的效果。

Roller flying shear can be used for coil splitting, welding part removing and sampling. The roller cutter is PLC controlled. It can minimize the length difference when the line speed is changed. The cutting speed can be as much as 240mpm. This roller flying shear has been adapted

to many tin coating line, CA line and continuous rolling line.

● 滾筒型的飛剪，用于生產線分卷、剪切焊接區域和剪切取樣。

Roller type shear, used for coil splitting, welding part removing and sampling

● 滾筒剪由數字直接伺服控制；

controlled by PLC

● 滾筒剪的剪切速度最高能達到240mpm；取樣時Max100m/min；

cutting speed 240mpm, and 100mpm during sampling.

● 技術參數 technical specification    

剪切長度：500～700mm       cutting length: 500 to 700 mm    

剪切速度：

cutting speed:

分卷時：Max240m/min max      240mpm for coil spliting              

取樣時：Max100m/min          max 100 mpm for sampling    

帶鋼規格：The strip specification

厚度：0.15～0.55mm coil specification: thickness: 0.15 to 0.55mm

寬度：750～1050mm width: 750 to 1050 mm   

注：本站展示所有圖片皆為我公司承接工程實拍。